Product ID:EPOXICAL 415 SURFACE COAT HARDENER,16086
MSDS Date:01/01/1987
FSC:8010
NIIN:00N006923
MSDS Number: BCNXL

Emergency Phone: 312 321 4383 (DAY)

Cage: HO311

Telephone: 312-606-4000 (EMERG /4542)

Cage: HO311

ALIPHATIC AMIDO-AMINE

ACCELERATED ALIPHATIC AMINE

Effects of Overexposure:PRLNG/RPTD CONTACT MAY CAUSE EYE IRRIT,OTHR
ALLERGIC RESPOSES-SKIN IRRIT/DERMATITIS.(SEE SUPP DATA)

First Aid:EYES:IMMED FLUSH W/RUNNING H*2O @ LEAST 15 MIN,INCLUDE UNDER
LIDS.GET IMMED MED ATTN. INHAL:REMOVE TO FRESH AIR.GET MED HELP FOR
SERIOUS EXP. SKIN:WASH EXP AREA IMMED W/SOAP & H*2O.REMOVE CONTAM
CLOTH ES,SHOES IMMED-CLEAN BEFROE REUSE. (SEESUPP DATA)

Flash Point:>225F,107C (COC)
Extinguishing Media:FOAM,CO*2,DRY CHEMICALS
Fire Fighting Procedures:USE FULL PROTECTIVE CLOTHING & SCBA
Unusual Fire/Explosion Hazard:NONE

Spill Release Procedures:SOAK UP IN AN ABSORBANT,SCOOP UP & PLACE IN
CLOSED CONTAINR.FLUSH RESIDUE W/PLENTY OF H*2O.

Handling and Storage Precautions:STORE AWAY FROM STRONG ACIDS,OXIDIZING
AGENTS.PROTECT CNTNRS FROM PHYSICAL DAMAGE.STORE IN CLOSED CNTNRS
IN COOL,DRY,WELL VENT AREA.AVOID SKIN CONTACT
Other Precautions:USE ONLY W/ADEQ VENTILATN.AVOID BREATHING VAPS.NO
EATING/SMOKING IN AREA OF USE/STORAGE.SENSITIZED PERSONS SHOULD NOT
WORK WITH/NEAR THIS MATL.EMER PHONE #:312-321-4382,NIGHT.PREP
DATE:4/24/86

Respiratory Protection:NIOSH/MSHA APPROVED ORGANIC VAPOR RESPIRATOR
Ventilation:LOCAL EXHAUST RECOMMENDED
Protective Gloves:RUBBER GLOVES
Eye Protection:SAFETY GLASSES
Other Protective Equipment:SAFETY SHOWER,EYE BATH IN AREAS WHERE LRG
AMTS ARE USED
Supplemental Safety and Health
PART B OF A 2-PART KIT.OVEREXP EFTS:INHAL HAZARDS POSS WHEN
HEAT/MIST.POSS EYE DAMAGE.FIRST AID:DESTROY SHOES.IF CONSCIOUS,GIVE
3 GLASS MILK,FRUIT JUICE OR H*2O,INDUCE VOMIT.GET IMMED MED ATTN

Solubility in Water:30%
Appearance and Odor:VISCOUS,AMBER LIQUID W/AMINE ODOR.
Percent Volatiles by Volume:0

Stability Indicator/Materials to Avoid:YES
STRONG ACID,EPOXY RESINS,OXIDIZING AGENTS
Hazardous Decomposition Products:THERMAL DECOMPOSITION: POSSIBLE
NITROGEN OXIDES
Conditions to Avoid Polymerization:STRONG ACIDS,EPOXY RESINS IN
UNCONTROLLED CONDITIONS.

Waste Disposal Methods:INCINERATE OR BURY IN LANDFILL IN ACCORDANCE
W/LOCAL,STATE & FEDERAL REGULATIONS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.